ABOUT US
OVER 31 YEARS IN THE ELECTRONICS INDUSTRY
Corporate Group TechnoKom specializes in radio systems engineering and integration.
The team of highly skilled developers, including engineers and programmers, was created in 1993 in Chelyabinsk and was originally based at the Department of Radio-Technical Systems of the South Ural State University.
Eventually a small production company developed into a concern of companies united by a common purpose, which formed the Corporate Group TechnoKom.
Over the years company's specialists accumulated extensive practical knowledge in design and production of various electronic devices and systems.
TechnoKom-Technology, a member of the Corporate Group TechnoKom, has one of the most technologically advanced production facilities for serial assembly of electronic boards in Russia. In 2009 the company successfully launched its own fully automated surface mount (SMD) assembly line.
Today the entire process from designing to final product is carried out in Chelyabinsk on the basis of the cutting edge European and Japanese equipment. The high quality of electronic assembly is confirmed by both domestic and foreign experts.
The advantage of our solutions is their reliability and ease of use. We guarantee the quality and durability of our products.
Andrey Bondarenko
C.E.O.
C.E.O.
Today the Corporate Group TechnoKom is a recognized leader in the design and manufacture of GPS/GLONASS satellite tracking systems and monitoring of vehicles and personnel in the Russian Federation.
Our product has a wide range of applications and can be installed on cars and trains, planes and ships, agricultural and construction equipment. It’s no secret that the success of any business today depends largely on the efficient operation of transport services. Modern technologies allow executing control of all forms of transport anywhere in the world with the help of World Wide Tracking conception.
There are various consumers of our leading satellite tracking system AutoGRAPH. It is used by the major steel mills, gas and oil industry companies, freight forwarders of the local and federal levels, urban transport and taxi companies, ambulances, municipal services, vehicle rental services, banks and collectors, security companies, farmers and agricultural holdings, fleets and road construction companies, quarries and mines, trains and small aircrafts, such as planes and helicopters.
Our range of on-board controllers covers almost all areas of application and allows you to optimally and efficiently solve a wide variety of tasks for transport control and management.
More than 500.000 AVL & navigation system units AutoGRAPH are operating at this very second on various local and foreign enterprises.
OUR PROJECTS:
1993 | AUTOMATIC FILLING AND ACCOUNTING SYSTEM BY FUEL CARDS | |
1996 | HEAT METERS «TEPLOKON» | |
1998 | INDUSTRIAL WEIGHT MEASURING AND DOSING SYSTEMS FOR BULK STOCKS | |
1999 | AUTOMATIC PROCESS CONTROL UNITS (FOR «TEPLOPRIBOR» FACTORY) | |
2002 | COMPLEX AUTOMATION OF ASPHALT PLANTS | |
2003 | HIGH PRECISION AUTOMATIC ROAD SCRAPER DUMP LEVELING SYSTEM «HORIZON» | |
2004 | GPS/GLONASS AVL AND FLEET MANAGEMENT SYSTEM «AutoGRAPH» | |
2005 | ETHERNET MONITORING AND CONTROL UNITS FOR INTERNET ACCESS PROVIDERS | |
2009 | PCB ASSEMBLY SERVICE | |
2010 | DATA TRANSMISSION SYSTEM UNITS FOR PUBLIC UTILITIES AND GAS-OIL INDUSTRY | |
2013 | FUEL LEVEL SENSORS «TKLS» |
DEVELOPMENT
Product development starts with the needs analysis of our customers and dealers. The research team continually monitors the market, researches for new technologies and components, sets the standards for new products and ensures compliance with the current legislation. Constant technical support of the world leading manufacturers and suppliers of components ensures state of the art engineering solutions. All this gives us an edge and helps to make sure that we are one step ahead of our competitors.
The next stage of development is conducted by the design-engineering department. This team deals with the immediate development of products and the circuit design. A team of professional design engineers implements the requirements of the research phase, extends products’ functionality, introduces new technologies and components into the system and cuts off dead-end solutions. Development is conducted on the basis of the latest hardware and software. The team uses a wide range of measuring and testing equipment from the leading manufacturers.
Extensive use of 3D printing technology and 3D-prototyping during the development of cases and PCBs allows us to check the design elements quickly and make changes to the product well before the start of batch production. To assess the behavior of devices and components in real and extreme conditions we use a climatic chamber, which allows us to conduct temperature-cycle testing of samples and simulate the required climatic zones, change of seasons and the critical heating and cooling.
During the development of almost any electronic device we simultaneously work in three directions: on the design of its hardware, its firmware and software.
Once the unit has been designed and tested, it goes into production.
Professional engineers supervise and optimize the manufacturing process for all stages of the production.
MANUFACTURE
All equipments used in the production are supplied by leading global manufacturers. High quality of end-products is obtained by complete automation and full quality control at all production steps.
• The production starts with the application of solder paste to PCB using screen and stencil printer integrated in the production line.
• The next step is provided with MYDATA automatic and precision high-speed chip mounters. Optimal task assignment between mounters provides dramatic performance increase of production line. Due to careful timing, PCBs are delivered from one mounter into the next mounter without interruption of operating process for a moment.
• TechnoKom is one of the first manufacturers in Russia using Vapour Phase Soldering Technology in production. Nowadays it is the most innovative and advanced technology, which is used for soldering. TechnoKom uses the ASSCON VP1000 vapour phase soldering system in its production. Due to this fact the optimum temperature is ensured at all component positions, excluding over- and underheatings, which is typical for conventional soldering systems. Application of vapour phase soldering system provides fault-free soldering of complex components and PCBs.
• Automated conveyor connecting all units of the production line together is responsible for automatic waiting queue and delivery of printed boards from one unit to others.
• The assembling quality control is the essential part of the production. Application of automated optical inspection machine by NORDSON reliably minimizes the risk of manufacturing defect. When any fault or unreliable joint is captured it is shown on the display of the computer, as well as the fault is reported to an operator.
• In complex conditions, XT V 160 electronics X-ray inspection machine is used. It allows to look inside the PCB and its components.
• The last step – multiphase PCB test using hi-tech equipment is guaranty of the high quality of TechnoKom products.
Note: All photos are real TechnoKom Technology photos.